Introduction
If you are facing disappointing issues of “dji drone not wont fly laanc,” you are not alone. Many drone pilots have faced problems where their DJI refuses to take off, especially in areas requiring LAANC (Low Altitude Authorization and Notification Capability) approval. Whether you are an entertainment flyer or a Part 107 pilot, it is important to understand the issue to fly safely and legally in controlled airspace.
In this guide, we break down why your dji drone not wont fly laanc issue occurs. We also go through the process of preventing LAANC-related errors, explain DJI’s compliance features, and how to manage authorization properly.
What Is LAANC and Why It Matters
LAANC stands for Low Altitude Authorization and Notification Capability, a system developed by the FAA (Federal Aviation Administration) that allows drone pilots to receive near-instant approval to fly in controlled airspace.
Before LAANC, getting authorization could take days. Now, apps like AirMap, Aloft (formerly Kittyhawk), and DJI FlySafe streamline the process. However, if your dji drone not wont fly laanc, it likely means:
- You haven’t received proper LAANC authorization.
- Your authorization hasn’t synced to your DJI app.
- You’re in a restricted area.
Understanding LAANC is the first step to resolving this common flying issue. It plays a major role in controlling drone traffic around airports and sensitive zones.
Why “DJI Drone Not Wont Fly LAANC” Happens
If your dji drone not wont fly laanc, there can be multiple causes. Here are the most common reasons:
1. DJI FlySafe Geofencing
DJI uses geofencing to restrict flights in sensitive areas. Even if you have LAANC approval, DJI’s system may block takeoff until it’s confirmed.
2. Authorization Not Synced
You might have received LAANC approval from a third-party app like Aloft, but the DJI Fly app doesn’t reflect that status.
3. Manual Unlocking Required
In some cases, even with LAANC clearance, you must apply for a DJI Self-Unlock or Custom Unlock Certificate.
4. Incorrect Flight Settings
Flying under the wrong profile (e.g., selecting recreational instead of Part 107) might limit your flight.
5. Time Mismatch
LAANC approvals are time-bound. If your drone says “not authorized,” make sure you’re flying within the approved window.
How to Fix DJI Drone Not Wont Fly LAANC Issue
Fixing the issue involves checking several layers of authorization and syncing. Here’s how to fix your dji drone not wont fly laanc problem step-by-step:
Step 1: Confirm Your LAANC Approval
Use apps like Aloft, AirMap, or UASidekick to request LAANC access. Make sure you enter:
- The correct flight time and date
- Accurate coordinates
- The correct altitude
Once approved, take a screenshot for proof.
Step 2: Check DJI FlySafe Zone
Go to DJI FlySafe and enter your location. Check if the zone is:
- Authorization Zone: Requires DJI unlock + LAANC.
- Restricted Zone: No fly unless special authorization.
- Warning Zone: Requires user confirmation.
Step 3: Sync DJI App
Sometimes your LAANC clearance doesn’t auto-sync. Do this:
- Open DJI Fly / DJI GO 4
- Go to Profile > Settings > Sync Flight Data
- Reconnect drone and refresh home screen
Step 4: Submit a Self-Unlock Request
Go to DJI’s Self Unlock page:
- Input your drone model and location
- Upload your LAANC approval
- Verify via SMS
- Restart the drone to apply settings
Step 5: Firmware and App Update
Outdated software can interfere with unlocking mechanisms. Update:
- DJI Fly / DJI GO 4 app
- Remote controller firmware
- Drone firmware
Step 6: Use the Same Account
Make sure your DJI account used for unlocking is logged into your drone’s controller.
Example Scenarios: Common Troubles Explained
Let’s look at common real-world cases of the dji drone not wont fly laanc issue:
Case 1: Flying Near an Airport
You received LAANC via Aloft but forgot to self-unlock DJI’s geofence. Result: Drone won’t arm motors.
Case 2: Using Wrong App
You’re using DJI GO 4, but your drone requires the DJI Fly app. Result: LAANC data not reflected, flight blocked.
Case 3: Mismatched Time Zone
You requested LAANC at 10 AM EST but your drone shows UTC time. You’re outside the approved time window, and the drone won’t take off.
Case 4: LAANC Granted, Still No Flight
DJI’s no-fly zone is stricter than FAA LAANC. Even though LAANC is approved, DJI’s software blocks flight.
Understanding these examples can help you figure out where the problem is.
How to Prevent Future DJI Drone Not Wont Fly LAANC Errors
Avoid future frustrations by following best practices:
- Always check DJI FlySafe before planning a flight.
- Request LAANC 30 minutes in advance, especially in busy areas.
- Save both LAANC and DJI unlock approvals on your phone.
- Use only one LAANC app to avoid conflicting permissions.
- Sync flight data before takeoff to ensure updates apply.
- Fly during the exact approved window even a 10-minute difference matters.
Additionally, if you’re flying commercially under Part 107, make sure to log all flights and keep a record of airspace authorizations.
Recommended Tools to Use With DJI Drones in LAANC Zones
Here are tools that help prevent and fix dji drone not wont fly laanc issues:
- Aloft (Kittyhawk) Fastest LAANC authorization, logs flights, and shows live airspace data.
- DJI FlySafe Official DJI geofencing checker and unlock tool.
- AirMap Another solid LAANC provider with a focus on commercial pilots.
- B4UFLY (by FAA) Good for basic visual airspace awareness.
Using these in combination ensures both FAA and DJI systems are aligned.
Conclusion: Get Your Drone in the Air the Right Way
The issue of dji drone not wont fly laanc may sound confusing, but it usually comes down to authorization sync or unlock mismatches. Always double-check both LAANC approval and DJI’s internal flight restrictions. Sync your apps, update firmware, and if needed, request a DJI self-unlock to reflect your LAANC status.
With the right tools, preparation, and steps, you’ll be flying legally and safely in controlled airspace in no time.